24.10.05 — Sıcak haddelenmiş demir veya çelikten bar ve çubukların üretilmesi (inşaat demiri dahil)
EU Parent Class Manufacture of basic iron and steel and of ferro-alloys
Turkish 6-digit NACE subclass 24.10.05 (Manufacture of basic iron and steel and of ferro-alloys) falls under OHS hazard tier "high" (Law 6331), Industrial Registry Law No. 6948, and cross-maps to EU NACE Section C.
2-Yr Risk Review • Law 6331
Up to 1,500,000 TL Reimbursable Dev Support + Establishment Grant
Workplace Opening & Operation License Regulation (2005/9207) & Tax Law Art. 127
MCC 5051
Activity Scope, Operators & Exclusions
Who Uses This Code & Typical Business Models
- Integrated blast-furnace and electric-arc steelworks
- Aluminum, copper, zinc, and precious-metal smelting/rolling/extrusion mills
- Iron, steel, and non-ferrous metal foundries
This Class Includes
16- Sıcak haddelenmiş demir veya çelikten bar ve çubukların üretilmesi (inşaat demiri dahil)
- operation of blast furnaces, steel converters, rolling and finishing mills
- production of pig iron and spiegeleisen in pigs, blocks or other primary forms
- production of ferro-alloys
- production of ferrous products by direct reduction of iron and other spongy ferrous products
- production of iron of exceptional purity by electrolysis or other chemical processes
- remelting of scrap ingots of iron or steel
- production of granular iron and iron powder
- production of iron and steel in ingots or other primary forms
- production of semi-finished products of iron or steel
- manufacture of hot-rolled and cold-rolled flat-rolled products of iron or steel
- manufacture of hot-rolled bars and rods of iron or steel
- manufacture of hot-rolled open sections of iron or steel
- manufacture of sheet piling of iron or steel and welded open sections of iron or steel
- manufacture of railway track materials (unassembled rails) of iron or steel
- production of blast furnace gas
Also Includes
- manufacture of coated or uncoated flat-rolled steel products in coils or in straight lengths of a width of 600 mm or more by cold re-rolling of hot-rolled flat products or of steel rods
This Class Excludes (Cross-References)
1- cold drawing of bars, see 24.31
Legislation, Licensing, Incorporation & Tax Framework
Governing Statutes & Regulations
Mandatory Permits, Licenses & Authorities
- EIA Positive Decision, Class 1 GSM Operating Permit, and Air Emission Permit
- Non-hazardous Scrap Metal Recovery License for arc furnaces/smelters
- Mandatory Nuclear Authority (NDK) radiation portal monitors for scrap-melting mills
Incorporation Route & Chamber Registration
- Capital Company (LTD / A.Ş.) & Chamber
- Chamber of Industry + Metals Exporters Union + Industrial Registry
- Sole Proprietor / Freelancer / Tradesman
- JSC/LLC mandatory for industrial steelworks and foundries.
VAT, Withholding & Statutory Incentives
Physical Premises & Municipal Permit Mandatory- Iron/steel deliveries trigger 5/10 VAT withholding and aluminum/copper/zinc profiles/ingots trigger 7/10 VAT withholding under Turkish VAT law.
- Eligible for Industrial Registry tax deductions and strategic investment incentives.
Cross-Border Regulatory Frameworks (EU / US / UK)
Iron, steel, and aluminum exports into the EU fall directly under EU CBAM (Reg. 2023/956) carbon declarations and EU Steel Safeguard quotas.
Maps to NAICS 331. Imports face US Section 232 steel/aluminum tariffs; domestic mills fall under EPA NESHAP & OSHA furnace rules.
Requires EA Part A(1) IPPC environmental permits and complies with UK Steel Safeguard quotas under UK SIC 24xxx.
Classification Boundaries & Audit Risks
- Primary smelting/rolling/casting sits in Div. 24, whereas cutting/welding structural steel or CNC machining belongs in Div. 25.
- Misapplying 5/10 vs 7/10 VAT withholding on steel vs aluminum causes immediate tax assessments.
OHS Hazard Rules, KOSGEB & Subclasses
6331 Occupational Health & Safety (OHS)
Strictest Law 6331 tier: requires Class A OHS Specialist and workplace physician from employee #1, other health personnel at 10+ staff, annual training, and mandatory vocational qualification certificates under Art. 17.
KOSGEB Entrepreneurship & Grants
Priority NACE division under KOSGEB guidelines: eligible for both the initial establishment grant and up to 1.5M TL (1.65M TL for young/female founders) in Business Development Support covering equipment, software licenses, and payroll. Completion of KOSGEB online entrepreneurship training prior to registration is mandatory.
KOSGEB Entrepreneur Support Program Guidelines (Manufacturing / Telecom / ICT / R&D)
Virtual Office & Tax Inspection
A virtual or residential-only address cannot satisfy tax inspection or municipal licensing. Physical premises with occupancy permit, fire safety clearance, and Sanitary or Non-Sanitary Establishment (GSM) license are mandatory.
Leasing physical premises from an individual landlord triggers 20% withholding tax (GVK Art. 94/5); corporate landlords instead issue invoices with 20% deductible VAT.
Statutory Duties under Turkey OHS Law No. 6331
Very Hazardous (Law 6331)| Statutory Duty | Frequency / Requirement | Legal Basis |
|---|---|---|
| Risk Assessment Renewal | At least every 2 years | Risk Assessment Reg. Art. 12 |
| Emergency Plan & Drill | Plan every 2 yrs (1 support per 30 staff) + annual drill | Emergency Reg. Art. 11, 14 |
| Staff Basic OHS Training | Min. 16 hours annually | OHS Training Reg. Art. 6, 11 |
| Periodic Health Exam | Annually (physician 15 min/staff/mo; nurse at 10+ staff) | Workplace Physician Reg. Art. 9, 12 |
| Class A Specialist & MYK | Class A Specialist (40 min/staff/mo) + mandatory Art. 17 vocational certs | Law 6331 Art. 6, 17 |
Global Classification Passport
Verified structural and concordance mappings across EU, US, UK, UN, and national registries.
Payment Processing & ISO 18245 MCC Profile
Visa / Mastercard ISO 18245Low-dispute B2B industrial supply compatible with commercial purchasing cards.
Critical Distinctions & Sibling Codes
24.10.01 — Ham çelik üretilmesi
Turkey 6-digit NACE subclass 24.10.01 — Manufacture of basic iron and steel and of ferro-alloys (Ham çelik üretilmesi). OHS Law 6331 classification: Very Hazardous (Çok Tehlikeli).
24.10.02 — Çelikten açık profil imalatı (sıcak haddeleme, sıcak çekme veya kalıptan çekme işlemlerinden daha ileri işlem görmemiş)
Turkey 6-digit NACE subclass 24.10.02 — Manufacture of basic iron and steel and of ferro-alloys (Çelikten açık profil imalatı (sıcak haddeleme, sıcak çekme veya kalıptan çekme işlemlerinden daha ileri işlem görmemiş)). OHS Law 6331 classification: Very Hazardous (Çok Tehlikeli).
24.10.03 — Demir ve çelikten sıcak veya soğuk çekilmiş yassı hadde ürünleri imalatı (demir veya çelik alaşımlı levha, şerit, sac, teneke sac, vb. dahil)
Turkey 6-digit NACE subclass 24.10.03 — Manufacture of basic iron and steel and of ferro-alloys (Demir ve çelikten sıcak veya soğuk çekilmiş yassı hadde ürünleri imalatı (demir veya çelik alaşımlı levha, şerit, sac, teneke sac, vb. dahil)). OHS Law 6331 classification: Very Hazardous (Çok Tehlikeli).
Classification Hierarchy & Data Export
- 24.10.05 Sıcak haddelenmiş demir veya çelikten bar ve çubukların üretilmesi (inşaat demiri dahil)
Frequently Asked Questions
What business activities and models fall under TR NACE 6-Digit 24.10.05?
24.10.05 (Sıcak haddelenmiş demir veya çelikten bar ve çubukların üretilmesi (inşaat demiri dahil)): Sıcak haddelenmiş demir veya çelikten bar ve çubukların üretilmesi (inşaat demiri dahil); operation of blast furnaces, steel converters, rolling and finishing mills; production of pig iron and spiegeleisen in pigs, blocks or other primary forms. Typical operators: Integrated blast-furnace and electric-arc steelworks; Aluminum, copper, zinc, and precious-metal smelting/rolling/extrusion mills.
What regulatory licensing and tax rules apply to 24.10.05 across EU, US, UK, or Turkey?
Strictest Law 6331 tier: requires Class A OHS Specialist and workplace physician from employee #1, other health personnel at 10+ staff, annual training, and mandatory vocational qualification certificates under Art. 17. Workplace status: Physical Premises & Municipal Permit Mandatory. Tax/Incentives: Iron/steel deliveries trigger 5/10 VAT withholding and aluminum/copper/zinc profiles/ingots trigger 7/10 VAT withholding under Turkish VAT law.
What are the international classification equivalents and MCC code for 24.10.05?
Verified concordance for 24.10.05: Payment MCC 5051 (Metal Service Centers and Offices).
Which activities are excluded from TR NACE 6-Digit 24.10.05?
Official explanatory notes exclude: cold drawing of bars, see 24.31.