24.10.03 — Demir ve çelikten sıcak veya soğuk çekilmiş yassı hadde ürünleri imalatı (demir veya çelik alaşımlı levha, şerit, sac, teneke sac, vb. dahil)
EU Parent Class Manufacture of basic iron and steel and of ferro-alloys
Turkish 6-digit NACE subclass 24.10.03 (Manufacture of basic iron and steel and of ferro-alloys) falls under OHS hazard tier "high" (Law 6331), Industrial Registry Law No. 6948, and cross-maps to EU NACE Section C.
2-Yr Risk Review • Law 6331
Up to 1,500,000 TL Reimbursable Dev Support + Establishment Grant
Workplace Opening & Operation License Regulation (2005/9207) & Tax Law Art. 127
MCC 5051
Activity Scope, Operators & Exclusions
Who Uses This Code & Typical Business Models
- Integrated blast-furnace and electric-arc steelworks
- Aluminum, copper, zinc, and precious-metal smelting/rolling/extrusion mills
- Iron, steel, and non-ferrous metal foundries
This Class Includes
16- Demir ve çelikten sıcak veya soğuk çekilmiş yassı hadde ürünleri imalatı (demir veya çelik alaşımlı levha, şerit, sac, teneke sac, vb. dahil)
- operation of blast furnaces, steel converters, rolling and finishing mills
- production of pig iron and spiegeleisen in pigs, blocks or other primary forms
- production of ferro-alloys
- production of ferrous products by direct reduction of iron and other spongy ferrous products
- production of iron of exceptional purity by electrolysis or other chemical processes
- remelting of scrap ingots of iron or steel
- production of granular iron and iron powder
- production of iron and steel in ingots or other primary forms
- production of semi-finished products of iron or steel
- manufacture of hot-rolled and cold-rolled flat-rolled products of iron or steel
- manufacture of hot-rolled bars and rods of iron or steel
- manufacture of hot-rolled open sections of iron or steel
- manufacture of sheet piling of iron or steel and welded open sections of iron or steel
- manufacture of railway track materials (unassembled rails) of iron or steel
- production of blast furnace gas
Also Includes
- manufacture of coated or uncoated flat-rolled steel products in coils or in straight lengths of a width of 600 mm or more by cold re-rolling of hot-rolled flat products or of steel rods
This Class Excludes (Cross-References)
1- cold drawing of bars, see 24.31
Legislation, Licensing, Incorporation & Tax Framework
Governing Statutes & Regulations
Mandatory Permits, Licenses & Authorities
- EIA Positive Decision, Class 1 GSM Operating Permit, and Air Emission Permit
- Non-hazardous Scrap Metal Recovery License for arc furnaces/smelters
- Mandatory Nuclear Authority (NDK) radiation portal monitors for scrap-melting mills
Incorporation Route & Chamber Registration
- Capital Company (LTD / A.Ş.) & Chamber
- Chamber of Industry + Metals Exporters Union + Industrial Registry
- Sole Proprietor / Freelancer / Tradesman
- JSC/LLC mandatory for industrial steelworks and foundries.
VAT, Withholding & Statutory Incentives
Physical Premises & Municipal Permit Mandatory- Iron/steel deliveries trigger 5/10 VAT withholding and aluminum/copper/zinc profiles/ingots trigger 7/10 VAT withholding under Turkish VAT law.
- Eligible for Industrial Registry tax deductions and strategic investment incentives.
Cross-Border Regulatory Frameworks (EU / US / UK)
Iron, steel, and aluminum exports into the EU fall directly under EU CBAM (Reg. 2023/956) carbon declarations and EU Steel Safeguard quotas.
Maps to NAICS 331. Imports face US Section 232 steel/aluminum tariffs; domestic mills fall under EPA NESHAP & OSHA furnace rules.
Requires EA Part A(1) IPPC environmental permits and complies with UK Steel Safeguard quotas under UK SIC 24xxx.
Classification Boundaries & Audit Risks
- Primary smelting/rolling/casting sits in Div. 24, whereas cutting/welding structural steel or CNC machining belongs in Div. 25.
- Misapplying 5/10 vs 7/10 VAT withholding on steel vs aluminum causes immediate tax assessments.
OHS Hazard Rules, KOSGEB & Subclasses
6331 Occupational Health & Safety (OHS)
Strictest Law 6331 tier: requires Class A OHS Specialist and workplace physician from employee #1, other health personnel at 10+ staff, annual training, and mandatory vocational qualification certificates under Art. 17.
KOSGEB Entrepreneurship & Grants
Priority NACE division under KOSGEB guidelines: eligible for both the initial establishment grant and up to 1.5M TL (1.65M TL for young/female founders) in Business Development Support covering equipment, software licenses, and payroll. Completion of KOSGEB online entrepreneurship training prior to registration is mandatory.
KOSGEB Entrepreneur Support Program Guidelines (Manufacturing / Telecom / ICT / R&D)
Virtual Office & Tax Inspection
A virtual or residential-only address cannot satisfy tax inspection or municipal licensing. Physical premises with occupancy permit, fire safety clearance, and Sanitary or Non-Sanitary Establishment (GSM) license are mandatory.
Leasing physical premises from an individual landlord triggers 20% withholding tax (GVK Art. 94/5); corporate landlords instead issue invoices with 20% deductible VAT.
Statutory Duties under Turkey OHS Law No. 6331
Very Hazardous (Law 6331)| Statutory Duty | Frequency / Requirement | Legal Basis |
|---|---|---|
| Risk Assessment Renewal | At least every 2 years | Risk Assessment Reg. Art. 12 |
| Emergency Plan & Drill | Plan every 2 yrs (1 support per 30 staff) + annual drill | Emergency Reg. Art. 11, 14 |
| Staff Basic OHS Training | Min. 16 hours annually | OHS Training Reg. Art. 6, 11 |
| Periodic Health Exam | Annually (physician 15 min/staff/mo; nurse at 10+ staff) | Workplace Physician Reg. Art. 9, 12 |
| Class A Specialist & MYK | Class A Specialist (40 min/staff/mo) + mandatory Art. 17 vocational certs | Law 6331 Art. 6, 17 |
Global Classification Passport
Verified structural and concordance mappings across EU, US, UK, UN, and national registries.
Payment Processing & ISO 18245 MCC Profile
Visa / Mastercard ISO 18245Low-dispute B2B industrial supply compatible with commercial purchasing cards.
Critical Distinctions & Sibling Codes
24.10.01 — Ham çelik üretilmesi
Turkey 6-digit NACE subclass 24.10.01 — Manufacture of basic iron and steel and of ferro-alloys (Ham çelik üretilmesi). OHS Law 6331 classification: Very Hazardous (Çok Tehlikeli).
24.10.02 — Çelikten açık profil imalatı (sıcak haddeleme, sıcak çekme veya kalıptan çekme işlemlerinden daha ileri işlem görmemiş)
Turkey 6-digit NACE subclass 24.10.02 — Manufacture of basic iron and steel and of ferro-alloys (Çelikten açık profil imalatı (sıcak haddeleme, sıcak çekme veya kalıptan çekme işlemlerinden daha ileri işlem görmemiş)). OHS Law 6331 classification: Very Hazardous (Çok Tehlikeli).
24.10.05 — Sıcak haddelenmiş demir veya çelikten bar ve çubukların üretilmesi (inşaat demiri dahil)
Turkey 6-digit NACE subclass 24.10.05 — Manufacture of basic iron and steel and of ferro-alloys (Sıcak haddelenmiş demir veya çelikten bar ve çubukların üretilmesi (inşaat demiri dahil)). OHS Law 6331 classification: Very Hazardous (Çok Tehlikeli).
Classification Hierarchy & Data Export
- 24.10.03 Demir ve çelikten sıcak veya soğuk çekilmiş yassı hadde ürünleri imalatı (demir veya çelik alaşımlı levha, şerit, sac, teneke sac, vb. dahil)
Frequently Asked Questions
What business activities and models fall under TR NACE 6-Digit 24.10.03?
24.10.03 (Demir ve çelikten sıcak veya soğuk çekilmiş yassı hadde ürünleri imalatı (demir veya çelik alaşımlı levha, şerit, sac, teneke sac, vb. dahil)): Demir ve çelikten sıcak veya soğuk çekilmiş yassı hadde ürünleri imalatı (demir veya çelik alaşımlı levha, şerit, sac, teneke sac, vb. dahil); operation of blast furnaces, steel converters, rolling and finishing mills; production of pig iron and spiegeleisen in pigs, blocks or other primary forms. Typical operators: Integrated blast-furnace and electric-arc steelworks; Aluminum, copper, zinc, and precious-metal smelting/rolling/extrusion mills.
What regulatory licensing and tax rules apply to 24.10.03 across EU, US, UK, or Turkey?
Strictest Law 6331 tier: requires Class A OHS Specialist and workplace physician from employee #1, other health personnel at 10+ staff, annual training, and mandatory vocational qualification certificates under Art. 17. Workplace status: Physical Premises & Municipal Permit Mandatory. Tax/Incentives: Iron/steel deliveries trigger 5/10 VAT withholding and aluminum/copper/zinc profiles/ingots trigger 7/10 VAT withholding under Turkish VAT law.
What are the international classification equivalents and MCC code for 24.10.03?
Verified concordance for 24.10.03: Payment MCC 5051 (Metal Service Centers and Offices).
Which activities are excluded from TR NACE 6-Digit 24.10.03?
Official explanatory notes exclude: cold drawing of bars, see 24.31.