Skip to content
UN ISIC Rev. 5 2219 221 ↗
● Official Registry Data: 2026-11-19

2219 — Manufacture of other rubber products

UN ISIC Rev. 5 2219 (Manufacture of other rubber products) classifies within economic division 22 (Subject to EU Single-Use Plastics Directive (2019/904), PPWR recycled-content mandates, and EU Food-Contact Plastics Reg), linking EU/UN activity boundaries with US NAICS, UK SIC, and national regulatory obligations.

01 / Standard & Revision
UN ISIC Rev. 5

UNSD • v5.0

02 / Parent Hierarchy
221

Manufacture of rubber products

03 / Mapped Standards
7

NAICS 313320

04 / Subclasses & Scope
18 Items

11 Exclusion Refs

01 / OFFICIAL SCOPE & OPERATORS

Activity Scope, Operators & Exclusions

Who Uses This Code & Typical Business Models

  • Tire, retreading, rubber hose, belt, and gasket factories
  • PVC pipes, window profiles, and custom injection-molded industrial parts
  • Plastic film, PET bottle, crate, and rigid packaging manufacturers

This Class Includes

18
  • manufacture of other products of natural or synthetic rubber, unvulcanised, vulcanised or hardened:
  • • rubber plates, sheets, strip, rods, profile shapes
  • • tubes, pipes and hoses
  • • rubber conveyor or transmission belts or belting
  • • rubber hygienic articles: sheath contraceptives, teats, hot water bottles etc.
  • • rubber articles of apparel
  • • rubber thread and rope
  • • rubberised yarn and fabrics
  • • rubber rings, fittings and seals
  • • rubber roller coverings
  • • inflatable rubber mattresses
  • • inflatable balloons
  • manufacture of rubber brushes
  • manufacture of hard rubber pipe stems
  • manufacture of hard rubber combs, hair pins, hair rollers, and similar
  • manufacture of rubber expansion joints for the construction industry
  • manufacture of cellular rubber latex
  • manufacture of rubber floor coverings

Also Includes

  • manufacture of rubber repair materials
  • manufacture of textile fabric impregnated, coated, covered or laminated with rubber
  • manufacture of rubber waterbed mattresses
  • manufacture of rubber bathing caps and aprons
  • manufacture of rubber wet suits and diving suits
  • manufacture of rubber sex articles
  • manufacture of apparel made of latex

This Class Excludes (Cross-References)

11
02 / REGULATORY & TAX DOSSIER

Legislation, Licensing, Incorporation & Tax Framework

Div. 22 • Sec. C Law 6948 Industrial Reg.

Governing Statutes & Regulations

Industrial Registry Law No. 6948 Environment Law & GEKAP Packaging Declarations Food-Contact Plastics Reg. OHS Law No. 6331 (Hazardous)

Mandatory Permits, Licenses & Authorities

  • Municipal Class 1/2 GSM Permit and Air Emission Permit
  • Ministry of Agriculture Registration for food-contact bottles/containers
  • TSE/CE product standards for PVC/PE construction pipes

Incorporation Route & Chamber Registration

EU NACE Rev. 2.1 Framework
Subject to EU Single-Use Plastics Directive (2019/904), PPWR recycled-content mandates, and EU Food-Contact Plastics Reg. 10/2011.
United States (IRS / SBA / NAICS)
Maps to NAICS 326. Requires OSHA machine guarding, FDA 21 CFR 177 indirect food-additive compliance, and NHTSA tire safety IDs.
United Kingdom (Companies House / HMRC)
Directly impacted by the UK HMRC Plastic Packaging Tax (if <30% recycled content) and UK REACH under UK SIC 22xxx.

VAT, Withholding & Statutory Incentives

  • Plastic scrap/regrind purchases carry strict 9/10 VAT reverse-charge or exemption rules; packaging producers must track GEKAP environmental fees.
  • Industrial Registry holders receive KVK Art. 32/7 tax reduction and KOSGEB grants.

Cross-Border Regulatory Frameworks (EU / US / UK)

TR • Corporate & Tradesmen Registry

Chamber of Industry/Commerce + Industrial Registry — Tradesmen or Chamber of Commerce

EU / Global Technical Alignment

Subject to EU Single-Use Plastics Directive (2019/904), PPWR recycled-content mandates, and EU Food-Contact Plastics Reg. 10/2011.

AUDIT & BOUNDARY CHECK

Classification Boundaries & Audit Risks

  • Sorting/shredding plastic waste strictly for recovery belongs in Div. 38, whereas molding finished plastic products belongs in Div. 22.
  • Food-contact resin certification cannot be substituted by industrial-grade recycled pellets.
04 / INTERNATIONAL CROSSWALK & MCC

Global Classification Passport

Verified structural and concordance mappings across EU, US, UK, UN, and national registries.

05 / BOUNDARIES & COMPARISON

Critical Distinctions & Sibling Codes

Open Full Comparison Tool →
06 / TAXONOMY TREE

Classification Hierarchy & Data Export

07 / FAQ

Frequently Asked Questions

What business activities and models fall under UN ISIC Rev. 5 2219?

2219 (Manufacture of other rubber products): manufacture of other products of natural or synthetic rubber, unvulcanised, vulcanised or hardened:; • rubber plates, sheets, strip, rods, profile shapes; • tubes, pipes and hoses. Typical operators: Tire, retreading, rubber hose, belt, and gasket factories; PVC pipes, window profiles, and custom injection-molded industrial parts.

What regulatory licensing and tax rules apply to 2219 across EU, US, UK, or Turkey?

EU: Subject to EU Single-Use Plastics Directive (2019/904), PPWR recycled-content mandates, and EU Food-Contact Plastics Reg. 10/2011. US: Maps to NAICS 326. Requires OSHA machine guarding, FDA 21 CFR 177 indirect food-additive compliance, and NHTSA tire safety IDs. UK: Directly impacted by the UK HMRC Plastic Packaging Tax (if <30% recycled content) and UK REACH under UK SIC 22xxx.

What are the international classification equivalents and MCC code for 2219?

Verified concordance for 2219: US NAICS 2022: 313320 (Fabric Coating Mills), 326211 (Tire Manufacturing (except Retreading)), 326220 (Rubber and Plastics Hoses and Belting Manufacturing).

Which activities are excluded from UN ISIC Rev. 5 2219?

Official explanatory notes exclude: manufacture of tyre cord fabrics, see 1399; manufacture of apparel of elastic fabrics, see 1410; rubber sole and other rubber parts of footwear, see 1520.